How to access advanced bios settings HP

How to Access Advanced Bios Settings HP (5 Best Tips)


Your HP computer is designed to make life easier, with a wide range of BIOS settings that help you get the most out of your device.

Some of these settings are hidden by default, but with a little know-how, you can access them and customize your computer to meet your unique needs.

In this article, we’ll walk you through the steps “How to access advanced bios settings HP”. We’ll show you how to find and change these settings, and explain what each one does.

With a little patience and practice, you’ll be able to take control of your computer and get the most out of it. Let’s get started!

What Is BIOS?

You might be wondering, what is BIOS? BIOS stands for basic input/output system. It’s a low-level software that starts up your computer when you press the power button.

It does this by running a power-on self-test (POST) to make sure everything is functioning properly, and then it loads the operating system.

The BIOS is also responsible for setting your computer’s boot order, which is the order in which your computer tries to boot up from different devices.

Its primary function is to determine what input and output devices have been connected to the computer and load the operating system for a startup. There are tons of settings that can be adjusted in the BIOS;

For example, if you have your computer set to boot from a USB drive first, and you plug in a USB drive that has an operating system on it, your computer will try to boot from that USB drive.

If there’s no operating system on the USB drive, or if the USB drive is not plugged in, your computer will move on to the next device in the boot order, which is typically the hard drive.

Also Read: How to Track Stolen Laptop With Serial Number

How to Access the BIOS advanced setting on an HP Computer

Located at the core of your computer is a set of software instructions called the BIOS.. The BIOS is responsible for booting up your computer, and it also controls some advanced settings.

You can usually access the BIOS by pressing a key on your keyboard when you start up your computer. For HP computers, this key is usually F2.

Your keyboard’s arrow keys can be used to navigate the BIOS menus once you’re there The exact layout of the BIOS will vary depending on your computer model, The BIOS features should be listed under a section titled “Advanced BIOS Features.”

In the Advanced BIOS Features menu, you can change settings like the boot order and whether or not to enable features like virtualization and secure boot. You can also use this menu to access the HP Sure Start recovery environment.

Method One of accessing advanced bios setting on an HP: Entering BIOS Through the System Configuration Utility

The first method is to access the BIOS through the System Configuration Utility. To do so, you’ll need to:

–          After pressing the power button, Press F10 on your keyboard to enter BIOS setup after restarting your computer.

–          Select Advanced Options

–          Select System Configuration

–          Select BIOS Setup

–          Once you’re in the BIOS Setup menu, you can begin exploring the various settings and options available to you.

Method Two of accessing advanced setting on HP : Pressing F10 During Boot up

This next method is pretty simple, and only requires that you press a button during boot up.

All you have to do is turn on your HP computer and start pressing the F10 key. You’ll need to do this before Windows loads, so keep an eye out for the BIOS screen.

Once you’re in the BIOS, you can start exploring the advanced settings.

We’ve another few recommendations to Access Advanced BIOS settings in HP, restart your Computer & Stop whatever you are doing.

Enter BIOS Settings & press the Esc key repeatedly until the Startup menu opens. Power off or restart your computer again, and this time press F9. Press F10 and Get the Advanced Tab.

Also Check Out our Exclusive Tutorial on: How to Clean Laptop Fan (Methods Explained 2023)

Still Cannot Enter BIOS HP Laptop?

When the device starts, it may have trouble restoring the settings in Microsoft Windows’ BIOS.

Some HP laptops won’t display HP splash screen after restart. You can reset your system manually by using the Start button and pressing the keys. Press the F10 keys then go to the BIOS settings.

The computer is then installed into the BIOS. You may also set a time, a date or a boot order for each device. Alternatively you may have difficulty finding BIOS settings on a laptop by going to BIOS menu.

How do I access hidden BIOS settings?

If you’re using HP laptops you’ll have to find out where to find the hidden BIOS settings. In some HP models, such as HP ProBook HP Pavilion, you might not see the advanced setting tab; instead, you’ll see Main, Security, System configuration, and Exit. No need to worry; this means the advanced settings tab is hidden in HP Pavilion & HP ProBook.

The computer is important to its performance in its own ways but cannot be easily accessible from the machine. However, some models of HP can be accessed by pressing an individual key.

How can I get these files for my computer? Press either F10 or F13 on a HP laptop. When you go into your menus select a USB device that loads only minimal OS.

The following screen will show advanced BIOS choices.

How do I get to Advanced BIOS on Windows 10?

Can I install BIOS on my HP laptop? Many HP computer models feature a BIOS key to configure the BIOS settings.

This displays a default set-up for an embedded device. The BIOS keys can be re-accessed by clicking the arrow keys and choosing Advanced Startup Options. Alternatively press the F3 key / C4 key to start BIOS setup.

Windows10 users are able to view their bios using fn key. The BIOS keys are easily accessible for Windows 32bit or 64bit. If you can’t find a key press Power or Esc keys to open the Menu.

How to Change HP BIOS Settings on Computer

So you want to know how to change BIOS settings on your HP computer, huh? It’s good to see you’re on the right track.

There are a few different ways to do it, but the most common one is to use the F2 key when your computer starts up.

This will take you into the BIOS menu where you can make changes to things like your boot order, time and date, and other settings.

If you’re not sure how to navigate the BIOS menu, don’t worry – just look for the instructions that are displayed on the screen. They’ll usually tell you what keys to press to select different options.

Once you’ve made the changes you want, just save and exit the BIOS menu and your computer will reboot with the new settings in place.

Troubleshooting Unsuccessful BIOS Access on an HP Laptop

There are a few things you can try if you’re having trouble accessing the BIOS on your HP computer:

-Restart your computer and press F10 during startup. This should take you to the BIOS settings menu.

-If that doesn’t work, try restarting your computer and pressing F2 during startup. This should also take you to the BIOS settings menu.

-If you’re still having trouble, it’s possible that your computer’s BIOS is password-protected. In this case, you’ll need to contact HP customer support for help accessing the BIOS.

Hopefully one of these methods works for you and you’re able to access the BIOS settings on your HP computer.

Also Read: How to Turn on Dell Laptop Without Power Button

Related Questions About Accessing and Changing BIOS Advanced Settings on HP Computers

Q: Do I need to access BIOS advanced settings?

A: You only need to access advanced BIOS settings if you want to change the default settings. In most cases, the default settings are sufficient for most users.

Q: How Do I Fix Grub After Uninstalling Ubuntu?

A: Once you’ve accessed the UEFI Firmware settings, you’ll be able to access the hidden BIOS on your HP laptop. This is very important since changing this setting may result in problems booting Windows 10 again.

Note: Have some time to spare? Check out latest fix for BIOS Not Detecting USB.

Enter BIOS Settings Press the Esc key repeatedly until the Startup menu opens. Meanwhile, when your computer boots up, press F10 to open the BIOS Setup Utility . From here, you can also navigate through the advanced boot options menu by pressing ‘F9’ several times. You will see Main , Security , System Configuration , and the Exit tab but no Advanced tab.


By following the steps above, you should be able to “How to access advanced bios settings HP”. If you have any trouble, you can always contact HP support for help.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top